Carbon Fiber Gear TRD Shift Knob for 2012-2021 Toyota 4Runner Tundra Shifter Knob Replcae PTR57-34141: Automotive
Carbon Fiber Gear TRD Shift Knob for 2012-2021 Toyota 4Runner Tundra Shifter Knob Replcae PTR57-34141: Automotive
Great product and definitely worth the purchase! Took me a while to figure it out. Wish it came with instructions!
Use 8 screws at the bottom of the base of ur shifter pole. Tighten evenly on each side so base is secure and even. The bolt didnt fit inside the hole on shifter pole so i used a pointy screw to stab against where the hole in shifter lined up.
Insert spring.
This was the tricky part for me, the plastic piece that pushes down the button was too long on mine . i had to use the short screw attachment inside the handle all the way and then i had to do maybe a quarter turn back. Its tricky i actually took that plastic piece and rubbed it on the pavement until it was sanded down enough. If it wasnt placed just right/ in line it either wont go down far enough to shift or its not up high enough to remove key from ignition.. I would recommend not screwing in both sides of the screw on top. Just get it to fall close enough in line that you can smoothly put in one screw and test it. Than once you figure it out put the screw in the other side and tighten it all down. Should be good to go. This shifter fixed the issue i had with my old shifter. Should work for any car with push button. Hope you dont struggle as much as i did. Great buy.
Sorry i shoulda made a video
(Edit:)
After a while with the shifter the more i used it the less the screw on the inside wanted to stay perfect where i needed it so i just tightened the 2 screws i had in the handle so they locked the little plastic piece into the handle which is better than how i had it originally. Only down side haha is when im moving too quick like if i slam my car into park the spring will launch the handle out because i just have it set in loose. But it slides right back into place easily and everything is very sturdy/well made. Not positive how long ive had it but i still love it! Great purchase, looks good, and functions great. I hope this helps someone.
WORTH BUYING 100%
Stop scrolling for answers if it will fit. It is universal. The screws and adapters are there for a reason. How it works is based off how you set it up. The spring and screws play a major role into how u want the “lock/unlock” to work. It takes knowledge and patience to do this. 5 stars easy install and great look. The only eh part of it is that normally it’s supposed to be a shoelace material wrapped around the handle of the katana but instead it’s a plastic. Looks good though. And I’m more than sure u can install your own lace around the handle and take off the plastic this one comes with. Stop looking for handicaps or easy ways and answers to do things. Just do it.
This went on my 01 eclipse. Took me a good minute to figure out where all the screws go. Would've been nice if it came with instructions (video was not to helpful) but after staring at it for awhile, few curse words, and feeling like an idiot I finally figured it out. Easy to install once you know what your doing lol. Looks AWESOME 😎 definitely worth it
This was the best Xmas gift to myself and for my car!
Product: love it!! I only wish they had other colors available but by no means a deal breaker
Install: 4 of 5 super easy to install but does take a little patience and readjustment. I had to remove the plastic ring around the tip of the boot to make it so I can shift into all gears fluidly (including sport+/-) but was able to pull the boot around the base of adapter.
So first off, this is a great product it both looks and feels great in my car, (2021 Toyota Corolla SE Nightshade). I have used other shifter knobs before, and I can honestly say that this one is built better, it has 8 total screws securing the base, as opposed to my others which had 3-4. But before you buy this, make sure that the size will fit, my shifter is slightly angled forward, and the top of the handle is very close to the area with the stereo. Now onto how to install it, it is not super difficult, but there are no instructions that come with it, so this is for anyone who needs a little help.
1.) once you have removed your stock shifter knob, grab the largest of the black screws from the bag, and just twist them into the holes on the lower half of the black part with the 8 holes on it.
2.)place that over your shift rod, and tighten them equally and I cannot stress this enough tightly.
3.)place the spring inside of the black piece around your shift rod.
4.)The big silver screws go into the bottom of the handle, you need to experiment and find out which one is going to work best for your car.
4a.) you need to adjust the silver screw so that handle is able to be pressed down so that the four screw holes on the side line up with the slit on the side, and make sure that silver screw is just resting on top of your shift lock button thingy
5.) once you have that lined up, its a little tricky, but you have to screw in the screws through the slit on the side, and into the holes on the side of the handle, make sure you use the screws with the pointed ends for this.
6.) just to be safe go back over and make sure everything is as tight as it can be, and doesn't jiggle or turn when you grip it
Price: US $36.50
Rating: Previous / 5.0 fromReviews
Specification
【carbon fiber pattern】This Shift Knob Replacement for Toyota Tundra 4Runner 2015 2016 2017 2018 2019, Automatic Transmission；
【Easy to Install 】OEM Number : PTR57-34141, PTR5734141
【 Perfect match 】Very comfortable grip, high-end texture.Finish: Black; Material: “carbon fiber pattern” Advanced Leather；
【Features】: Simple Remove and Replace Installation no drilling or special tools required
【Tips】Please carefully compare the pictures or OE numbers to match your original parts before purchasing the product.
Description
This Shift Knob Replacement
- for Toyota Tundra 2015 2016 2017 2018 2019,
- for Toyota 4Runner 2015 2016 2017 2018 2019
Automatic Transmission；
- OEM Number : PTR57-34141, PTR5734141
- Very comfortable grip, high-end texture.
- Finish: Black;
- Material: “carbon fiber pattern” Advanced Leather；
- Made of high-quality leather material, tightly stitched with black and red stitching.
- Make the interior look more beautiful and generous.
Features: Simple Remove and Replace Installation no drilling or special tools required
Was a bit tedious to install trying to figure out how to mount it. It fits the 2010 Acura TSX very nicely and doesn't hit the face of the radio with the 26cm option. Overall satisfied with this piece.
I own a Subaru Legacy 2017 which is automatic. I wish there was instructions, and something more in detailed of installation. I’ve tried to watch some YouTube videos but non of them were as detailed as I’d like, so I pretty much had to figure it out on my own. It’s not too difficult to figure out, but it’s just an inconvenience, hence the 4 star review.
As for looks, I think it looks nice, and it’s actually decently heavy.
Something I found out recently, you don’t want the kantana part to be resting directly on the button to switch gears, but resting a little above or else when you try to pull your key from the ignition, it’ll be stuck.
Also the tool that was given to screw in the screws was the wrong size, it was far too small.
All in all, the installation process was a bite in the a** to do, but in the end it looks really nice!
Product information
Technical Details
| Manufacturer | MUSHENG |
|---|---|
| Brand | MUSHENG |
| Item Weight | 9.9 ounces |
| Package Dimensions | 5.75 x 3.62 x 2.32 inches |
| Manufacturer Part Number | PTR57-34141 |
Additional Information
| ASIN | B091C1T97Q |
|---|---|
| Best Sellers Rank | #169,361 in Automotive (See Top 100 in Automotive) #91 in Automotive Body Kits |
| Date First Available | March 30, 2021 |
Warranty & Support
Product Warranty:For warranty information about this product, please click hereFeedback
0 comments:
Post a Comment